loading

The RT5721 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface capable of operating up to 3.4MHz.

Using a proprietary architecture with synchronous rectification, the RT5721 is capable of delivering 1A continuously at over 80% efficiency, maintaining that efficiency at load currents as low as 10mA. The regulator operates at a nominal fixed frequency of 2.4MHz, which reduces the value of the external components. Additional output capacitance can be added to improve regulation during load transients without affecting stability.

At moderate and light loads, Pulse Frequency Modulation (PFM) is used to operate in Power-Save Mode with a typical quiescent current of 45μA at room temperature. Even with such a low quiescent current, the part exhibits excellent transient response during large load swings. At higher loads, the system automatically switches to fixed- frequency control, operating at 2.4MHz. In the Shutdown Mode, the supply current drops below 1μA, reducing power consumption. The PFM Mode can be disabled if fixed frequency is desired. The RT5721 is available in a small WL-CSP-11B 1.31x1.62 (BSC).

Applications

  • Application, Graphic, and DSP Processors
    ►ARMTM, TegraTM, OMAPTM, NovaThorTM, ARMADATM, KraitTM, etc.
  • Hard Disk Drives, LPDDR3, LPDDR4
  • Tablets, Netbooks, Ultra-Mobile PCs
  • Smart Phones
  • Gaming Devices
Key Spec.
RT5721A
Status Active
Vin (min) (V) 2.5
Vin (max) (V) 5.5
Number of Outputs 1
Vout (min) (V) 0.3
Vout (max) (V) 1.3
Output Adj. Method Digital
Iout (max) (A) 1
Current Limit (typ) (A) 1.67
Freq (typ) (kHz) 2400
Ext Sync No
Ron_HS (typ) (mOhm) 60
Ron_LS (typ) (mOhm) 34
Iq (typ) (mA) 0.045
Interface I2C
Features Enable Input;Fast Transient Response;I2C;OCP;OTP;PSM;Power Good;UVP
Package Type WL-CSP1.31x1.62-11(BSC)
Features
  • Steady 2.4MHz Switching Frequency
  • Fast Load Transient
  • Continuous Output Current Capability: 1A
  • 2.5V to 5.5V Input Voltage Range
  • Digitally Programmable Output Voltage
  • 0.3V to 1.3V Programmable Slew Rate for Voltage Transitions
  • I2C-Compatible Interface Up to 3.4MHz
  • PFM Mode for High Efficiency in Light Load
  • Quiescent Current in PFM Mode: 45µA (Typical)
  • Input Undervoltage Lockout (UVLO)
  • Thermal Shutdown and Overload Protection
  • Power Good Indicator
Datasheet
TitleLast UpdateDownload
2.4MHz 1A Step-Down Converter with I2C Interface2023/08/17
TOP